Not knuckle busting until you have to refasten that silly white plastic strap.
Originally Posted by supertech777
This is not a knuckle busting project, once you start , you will find out that its an easy DIY . Don't forget to vacuum any debri in the filter cavity
Sent from my Desire HD using Bimmer App
The technique is you have to position a smaller flathead screwdriver inside the holes of both straps in order to pull the top strap over the bottom strap.
Talking about the "release strap"
The DIY writer obviously has a bolt there because he broke it the first time around. Use my above technique instead.
Last edited by paperplane94; 09-19-2012 at 05:17 PM.