View Single Post
  #3  
Old 09-28-2012, 06:56 PM
SWISS SWISS is offline
On Top
Location: Certified Okie
 
Join Date: Apr 2005
Posts: 8,779
Send a message via AIM to SWISS Send a message via Yahoo to SWISS
Mein Auto: E30 S52 / S52 M roady
Quote:
Originally Posted by hornhospital View Post
To keep the tie rod end from spinning, lower the car until you can reach it with a jack. Put the jack under the tie rod end and raise it just enough to stop it from spinning. Use a 17mm socket to remove the nut. CLEAN the nut so that the socket will fully engage the flats before you go any further. Use a 6-point socket if you have one.
+A advice
__________________

Reply With Quote