View Single Post
  #5  
Old 10-01-2012, 06:27 AM
///fast5 ///fast5 is offline
Registered User
Location: Arkansas
 
Join Date: Sep 2012
Posts: 15
Mein Auto: e39 Bmw M5, e46 Bmw 330i
Quote:
Originally Posted by ard View Post
He did. First post.

The 16 is the table... and is probably "1b"..but you actually need to use 18. (yeah, known issue)

First code is the exhaust vanos control (due to the bad CPS, in my opinion)
Second code is actually 0A... this is the exhaust CPS cyl 5-8
Third I am not sure of, might be the ebox fan.

The first two are causing the driveability issues. Just replace the camshaft position sensor and see what comes back
since you have codes for cyl 5-8 i would recommend disassemble vanos control on right side which is gonna be oil fill cap side. and clean it with parts cleaner. then replace each o-ring that you supply from bmw dealer. be careful with the vanos board during removal. then put it back and check if you have signal after repair hasbeen performed. make sure wiring and connector is in good shape.
Reply With Quote