this is not accurate. i have the oem performance exhaust, installed at the vdc and there is no exhaust flap. there is a stub to terminate the vac line. the valve is for low rpm noise reduction.
Originally Posted by gotrice415
If you have an N54 back pressure is critical for waste gate/turbo operation since the flap is actuated in exhaust.
the op has a different issue.
Sent from my Galaxy Nexus using Bimmer App
Past: 2001 330i ZSP/ZPP/Step
Past: 2004 S60R 6MT Sport
Past: 2007 335i 6MT ZSP/ZCW/322/655
Past: 2010 335xi ZMP/ZCW/ZPP/PPK/PE
Present: 2013 335i 6MT ZMM/ZDH/ZTP/3AG/494/508
Current Homeland Threat Level: