View Single Post
  #29  
Old 10-08-2012, 07:37 AM
HPIA4v2 HPIA4v2 is offline
Officially Welcomed to the 'Fest
Location: washington
 
Join Date: Mar 2006
Posts: 2,173
Mein Auto: E60, E71, E92
Quote:
Originally Posted by kskane View Post
Guys, just in case the above post is confusing, I would like to know following;
1. What is the torx size on the bolts that hold the plastic transmission oil sump pan, T27 or T40 (why am I asking the question? -> read above post)
2. Is there a socket available that will fit the small area to undo the filler plug on the transmission? (So, I have only read about the L-shape tool but those do not let you torque it to specification and I can't find any 8mm socket that is in total length of 30-35mm as that is all the space there is near the transmission).
Torx, forgot which one; since I got a set of torx bits I didn't pay attention which one, I just try them on and see which one fits mine.

For hex drive, I bought cheap 8mm hex drive from Napa and grind the head about ye height (see picture) for drain and filler plugs on tranny pan:
Attached Thumbnails
Click image for larger version

Name:	short_hex.jpg
Views:	96
Size:	111.5 KB
ID:	344757  
Reply With Quote