View Single Post
  #5  
Old 10-13-2012, 08:11 AM
munibmw munibmw is offline
Registered User
Location: Charleston, SC
 
Join Date: Oct 2012
Posts: 14
Mein Auto: 1996 BMW 328ic
Quote:
Originally Posted by MINI+BMWtek View Post
Any faults stored by the DME? If main relay is not grounding DME is faulty considering that all inputs to DME are ok and wiring harness is not damage. Check ignition coils and injector resistance before ecu r/r. I think 1999 have MS41.1 DME'S you can't installed used DME as they get married to EWS once they are flashed and sync to EWS
The codes I got using a OBD II tester are: P1188, P1428, P1421, P1189 and P1250. All but the P1250 have been there for a while. After the crank but no start situation I reset the codes and they have not came back.

I believe I have the Siemens MS42.1 DME, same problem as you mention above, I hope it is not bad.
Reply With Quote