View Single Post
  #6  
Old 10-13-2012, 08:16 AM
munibmw munibmw is offline
Registered User
Location: Charleston, SC
 
Join Date: Oct 2012
Posts: 14
Mein Auto: 1996 BMW 328ic
Quote:
Originally Posted by wifesauto View Post
not clear. did you replace fuel pump before or after no start ? check for codes,check for crank shaft /camshaft signals to ecm. disconnect MAF sensor and try. put a noid [tester] on injector plug and look for pulse. it would seem you have spark but no fuel. if this all came about after pump replacement go back over your work and look for something amiss
The no start happen and the trying to bring the car back to life I replaced the fuel pump. It did not fix the situation but the fuel pump that was on the car, was not the proper BMW replacement it was taller than the stock, probably taken from another car.

I disconnected the MAF sensor and nothing happen, the car did not start.

I will get a noid tester or I will have someone crank while I listen for pulse on the injectors.
Reply With Quote