Bimmerfest - BMW Forums - View Single Post - Z3 Roadster (E36/7) Stuck partway through "shift pins" job -- any ideas?
View Single Post
Old 10-14-2012, 12:22 AM
2.3z3 2.3z3 is offline
Officially Welcomed to the 'Fest
Location: CA
Join Date: May 2007
Posts: 138
Mein Auto: Z3
I have not done this yet, but this is from the shift pin service write up.

Remove the pins from their respective bores. These will almost certainly be stuck in place (hence the need for the service). We found that we were able to pull the pins out by inserting a small, bent-tip screwdriver into the hole in the center of the pin and pulling them straight out.
Reply With Quote