View Single Post
  #1  
Old 10-14-2012, 06:23 PM
sander112 sander112 is offline
Registered User
Location: Mississippi
 
Join Date: Aug 2012
Posts: 7
Mein Auto: 2007 BMW X3 3.0si
Garage door opener

I have tried several different ways to program the garage door opener on the mirror. I have tried pushing 1 and 3 at the same time until yellow led on the mirror flashes fast, (I know this is the first step for clearing all previous codes). Push the purple learn button on the garage door motor (parked under the garage door motor) I then have the yellow light on it light up, I go to the mirror within the 30 sec., and push the 1 button and the remote (with it behind the mirror) at the same time 3 times each time waiting till it flashes once and space it about 1 sec. between breaks and it hasn't worked. But if I push them the 4th the 1 button flashes continuously. Which I take has accepted the program. The reason I think it is taking the code is when I push the 2 or 3 button it flashes slowly. It also reprograms the garage remote the first time. This is a rolling code garage door opener. I am trying to program a 2007 x3si. I have googled this and this is the way everyone has said to program it. Any suggestions will be appreciated.
Reply With Quote
Advertisement