Thread: Z3 Roadster (E36/7) Water where it ain't supposed to be
View Single Post
Old 10-15-2012, 09:16 AM
Hornedfrog1969 Hornedfrog1969 is offline
Registered User
Location: Northwest Florida
Join Date: Nov 2011
Posts: 85
Mein Auto: 97 Z3 2.8
There is no "joint" on the sealing frame. There are also no "joints" on the car bulkhead or top frame that the sealing frame mounts to. All three surfaces are smooth. Notice the pictures above. There is only one reason for a leak; inproper installation. I wouldn't tell them that, but insist on them fixing the problem if it continues to leak.
Reply With Quote