Speakers Not Working After Sub and Amp Installation
Today I decided to install 2 Kenwood KFC-W112S 12 inch subs along with a Sony amp: XM-GTX1852 in my 1999 BMW 323i.
After finishing all of the wiring, and turning the radio on, only the subwoofers were outputting sound. None of the stock speakers inside the car were making any noise. The method I used for wiring involved Ting into the speaker wires and remote wire near the stock amp. I'm using the stock head unit.
The guide I used to install the amp and subs is here:
The guide is titled: BSW BMW E46 Subwoofer System by BSW Installation Guide: d110.e46 for BMW 3 Series Sedan 99-05 (E46)
After looking at everything, I decided to pull everything back out and wire everything back to how it was before I touched it. The speakers still do not work. The stock amp appears to be on without the car even being on. It gets hot really quick. What would cause this?
Any help or suggestions would be greatly appreciated.