View Single Post
  #1  
Old 11-07-2012, 10:58 AM
jpdunn101 jpdunn101 is offline
Registered User
Location: Texas
 
Join Date: Oct 2012
Posts: 36
Mein Auto: 330I
M54 rod bolt torque spec?

I purchased the Bentley manual but found there is very little information on the lower end of the engine.

I looked for a sticky with the specs but couldn't find one.

I need the torque spec on rod bolts for a 2002 M54 3.0L that I am rebuilding... also curious if they recommend disposing of the old bolts and using new ones?

The rods were damaged by a hydrolock and there was no heat damage.

Thanks for your help!
Reply With Quote
Advertisement