Thread: Z3 HVAC controls
View Single Post
  #13  
Old 11-19-2012, 10:12 PM
senikc senikc is offline
Registered User
Location: Milledgeville, Ga
 
Join Date: Oct 2012
Posts: 78
Mein Auto: 1994 Mercedes E320
HVAC controls problem solved

After removing the glove box, and braces, I found the bowdon cable for the temp had come loose from the anchor clip letting the cable outer jacket move, after re clipping the cable it now works as it should.
the diverter door between floor and dash level vents would only move in one direction, after further investigation I found the pin on the back of the arm on the selector control was not in the groove as it should have been, after placing it back in the groove it now works as it should.

Thanks for all the input and information.

Charles
Reply With Quote