Today we will be moving the X3 to the body shop. I finally got a good picture of the Frame Rail that's kinked/bent for you guys to see. and a few misc. pictures too.
Here's the driver's side frame rail that's kinked/bent.
Here's the passenger side frame rail.
This is going back a little bit to the transmission stuff. This helped me a lot to find the allen head. I Googled "ga8hp automatic transmission" and searched under Images and found a 3D parts image of the Safety Lever to get the transmission into Neutral. Here it is.
I'll post pictures a little later once we move the X3 (F25) to the body shop and get it on the frame rack.
Thanks again for reading and the help!!
Last edited by TKO88; 11-29-2012 at 01:15 PM.