Bimmerfest - BMW Forums - View Single Post - 2003 ZHP Camber
Thread: 2003 ZHP Camber
View Single Post
Old 11-29-2012, 05:10 PM
QAfred QAfred is offline
Officially Welcomed to the 'Fest
Location: Panhandle of Florida
Join Date: Aug 2008
Posts: 919
Mein Auto: 328i, 330ci, R1200C
According to the Hunter machine at the Firestone shop I just went to, the front camber spec on my 01 330ci is:
Front = -0.4 to -1.1
Rear = -1.8 to -2.3
I also thought that was a lot of camber but tech stated it was toe that impacts tire wear and not so much the camber?

Also, does anyone ballast their car prior to alignment? Car requires 497 Lbs of ballast (150 lbs in each front seat, 150 in the middle of rear and 47Lbs in the trunk) oh, and don't forget, the fuel tank should be full too....prior to alignment and according to spec and Hunter machine in order to have an accurate alignment, at normal riding conditions, car needs to have ballast installed.

Reference page 34 for loading instructions.

Last edited by QAfred; 11-29-2012 at 05:15 PM.
Reply With Quote