Bimmerfest - BMW Forums - View Single Post - 2003 ZHP Camber
Thread: 2003 ZHP Camber
View Single Post
Old 12-01-2012, 01:44 AM
Dathaeus Dathaeus is offline
Officially Welcomed to the 'Fest
Location: Florida
Join Date: Sep 2008
Posts: 162
Mein Auto: 1997 BMW 328i Sports
Originally Posted by av98 View Post
If you are running a square setup (both the front and rear 17" BBS wheels have the same spec. EG: 17x7.5.) Then, DO NOT use my alignment setup as it's for a staggered wheel set. You may want to have them figure out the correct numbers by describing you want a neutral non-understeer biased alignment. If they know what they are doing then they should be able to give you some numbers for your car; if not I would go with the stock settings.
I am now running on

Hankook Ventus V12
Front: 225/45ZR-17
Rear: 255/40ZR-17

I am not sure how often I will be going to the road course since its expensive, but I do drive as legally aggressively as I can on the streets, so what camber settings would be good for me without excessive, unnecessary tire wear?
2003 ZHP 4dr
115,000 miles
Tires: BBS 17" rims
Hankook Ventus V12
Front: 225/45ZR
Rear: 255/40ZR
Reply With Quote