View Single Post
  #14  
Old 12-03-2012, 04:53 PM
Shaske87 Shaske87 is offline
Registered User
Location: Rainier, wa
 
Join Date: Feb 2012
Posts: 32
Mein Auto: 1995 BMW 525i
Fluid level is good. The process I used to refill and check as far as I know is supose to be correct. I filled it until it started folding out the hole. Started the car. Ran through all the gear 10 times holding at each gear for 5 seconds. Then topped off fluid again. I then let the car idle for 30mins to get the tranny at normal operating tempature. Then ran through the gears 10 more times. Topped it off until there Was a small amount coming out the hole then sealed it. If it did the process wrong please say so.
Reply With Quote