View Single Post
  #3  
Old 12-04-2012, 10:43 AM
TRIPLE_O TRIPLE_O is offline
OOO
Location: UPSTATE NY/NORTHERN NJ/NYC
 
Join Date: Feb 2012
Posts: 192
Mein Auto: E90 335i
What other errors were there? Is it a chassis stabilization error? What kind of coding did you do? Was the car running or just on? Please provide more details.

Quote:
Originally Posted by goldenbird View Post
While stationery and immediately after doing some coding, the 4x4 bulb comes on. the error code was something related to SAS not receiving power. The mechanic told me there might be a misconnection in the wiring or the sensor itself is faulty. he tested and find out no wiring problem and concluded that the sas have 2b replaced. I am not convinced.as he told me he cannot reset the error code !!! He tried then the lock to lock calibration and it didn't work. I searched for that fault code involving sas not powered or no output and could not find the related code. I wanted to concentrate my research based on that exact code bcs most thread I've read was not based on a specific DCS error code. Looking for any helpful info
Reply With Quote