View Single Post
  #17  
Old 12-07-2012, 07:05 PM
rippjd rippjd is offline
Officially Welcomed to the 'Fest
Location: Charlotte, NC
 
Join Date: Apr 2006
Posts: 200
Mein Auto: '05 745i / '10 X5 35d
Quote:
Originally Posted by JimmyW View Post
I've also attached screenshots of the info display in DIS. I think you are right rippjd, the module doesn't need any coding. But now I'm still stuck as to what is causing the issue.
Looks like most of the modules don't need to be coded as "variant recognition" occurs automatically with the first message from the ACC module. It's almost like there is something preventing communication. I assume you've re-checked the wiring per WDS?

Progman could do the formal conversion for all the control modules, but you would likely need to first change your VO to a Euro type, as ACC retrofit was never officially offered in North America US spec 7er.

For what it's worth, attached is the training module on the E65 ACC. Note this is not for ACC2 introduced in the 2006 model year.
Attached Files
File Type: pdf 23_ACC.pdf (409.7 KB, 148 views)
Reply With Quote