View Single Post
  #6  
Old 12-09-2012, 12:22 PM
Jason5driver's Avatar
Jason5driver Jason5driver is offline
Officially Welcomed to the 'Fest
Location: Middle of a corn field
 
Join Date: May 2007
Posts: 4,449
Mein Auto: E39 hamster w/ pin-wheel
Quote:
Originally Posted by King540i View Post
Fudman
How would one load a suspension when installing these parts? Which parts require loading when installed?
Thanks
Look here:
http://www.beisansystems.com/procedu..._procedure.htm

Quote:
Lift wheel carrier to position of "empty weight position" or "normal position" as previously measured (tape measure).
Utilize lift (jack and towel) to lift up on swing arm at its lowest point; found adjacent to wheel carrier inboard side at ball joint.
Or, you can drive the car on to some ramps, and torque everything down from there...
__________________

Last edited by Jason5driver; 12-09-2012 at 12:24 PM.
Reply With Quote