View Single Post
  #5  
Old 12-24-2012, 05:05 PM
Zenith86 Zenith86 is offline
Registered User
Location: California
 
Join Date: Dec 2012
Posts: 3
Mein Auto: 1991 BMW 535i
I have 12v continuously at the connecter with key in position 2 "running" fuse is fine, i changed it to be sure. There does look to be a scorch mark on one of the solder points on the bottom side of the plate. When the connecter is plugged in there is no voltage to the solder points or to the leads that go to the pump

One note on that, Its possible that the 12v im seeing is for the Fuel level sensor which runs off the same plug.

Last edited by Zenith86; 12-24-2012 at 05:07 PM.
Reply With Quote