12-30-2012, 06:48 AM
|
 |
Officially Welcomed to the 'Fest
Location: Houston, TX
|
|
Join Date: Jan 2009
Posts: 4,481
Mein Auto: 2011 535i M-Sport
|
|
Quote:
Originally Posted by mikepgon
Hello everyone
Rookie here needs help initiate coding. My car is a 2011 535i and I have the ENET cable and ESYS SOFTWARE PsdZdata 46.3 installed on a laptop with 64bit Win7. Plugged the cable to laptop, turned ignition on and laptop able to confirm communication with car. But when I open E-Sys and click connect tab, window opens but the "target" window is blank. Anyone with suggestion on what I should do next? Your assistance is greatly appreciated.
|
More than likely the "dist" are folders missing from your installation. The folders should be empty, but they need to be there.
So, make sure that there is a "Dist" folder in each of the Chassis (F01/F10/F25) folders etc.:
e.g. "C:\ESysData\psdzdata\mainseries\F010\F010_12_03_51 1\odx\dist":
Also, make sure E-Sys Data Path is set properly.
Go into E-Sys = > OPTIONS => SETTINGS => PROGRAM TAB => DIRECTORIES and set the PSDZdata path to to C:\ESysData:
__________________
- 2011 535i M-Sport (Born 10/10) - AW/BLK/DW - /ZMP (w/ARS & AD) /ZPP /ZP2 (w/ZPS & ZPT) /ZCV (w/SCAD) /6FL /6VC
- 2006 530i (Born 10/05) - SG/BLK/DW - /ZPP /ZCW /NAV (Returned to Mothership 05/11)
- BMWCCA #446923
- flickrŪ
|