View Single Post
  #25  
Old 01-06-2013, 12:49 PM
vintage42's Avatar
vintage42 vintage42 is offline
BMW CCA 1405
Location: Louisville, KY
 
Join Date: Jun 2007
Posts: 1,499
Mein Auto: 1997 BMW Z3 1.9 5MT
Quote:
Originally Posted by nfunk View Post
I remember when I tightened the nuts I had to hold the bolt so that it would not rotate which would change the cam angle.
I see, turn the bolt until the camber is right again, then hold it there and tighten the nut.
Reply With Quote