Thread: F10 6WA retrofit KOMBI
View Single Post
  #19  
Old 01-09-2013, 07:45 AM
mateforrest mateforrest is offline
Officially Welcomed to the 'Fest
Location: Madrid, Spain
 
Join Date: Oct 2012
Posts: 142
Mein Auto: BMW F10 530D SILVER
Quote:
Originally Posted by shawnsheridan View Post
So what happens when you try this:

Connect => Read FA => Activate FA => Read VCM => Left-Click on KOMBI => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on KOMBI (the ECU itself not the underlying CAFD) => Select CODE.

To determine your I-Level, go to VCM Module => VCM Master Tab => click Read under I-Steps. The I-Step (current) is the one you want to match when you select the CAFD from the "Detect CAF for SWE" options (e.g. F001-08-09-550).
Ok let me try.

But when i did this:

Connect => Read FA => Activate FA => Read VCM => Left-Click on KOMBI => Click on "Detect CAF for SWE" =>
i not sure but i think that i obtain the error of swaf´s

Regards.
Reply With Quote