View Single Post
Old 01-11-2013, 07:05 PM
ktono ktono is offline
Officially Welcomed to the 'Fest
Location: Kansas
Join Date: May 2011
Posts: 117
Mein Auto: '13 X5 50i
Originally Posted by ductman View Post
Vehicle drives great on the highway, no pulling or tramlining whatsoever, the tech is the one I met with before the alignment who stated that a minimum toe such as .01 would create stability issues on the highway, one thing I did notice is that my rear camber is -1.1 and -1.2 which I believe the -1.1 is out of the BMW spec, will this camber number of -1.1 cause any issue ?
Looking at my spec sheet the BMW camber target and range is as follows:

Rear at -1.3 +/- 0.15
Front at -0.20 +/- 0.30

So -1.10 is slightly under the minimum spec for the rear camber. I doubt this will have a noticeable impact but as you know ard's the real expert. I am guessing the back tires will set in a turn a little quicker especially with some load in the back.
Reply With Quote