Thread: Z4 Aux Input
View Single Post
  #4  
Old 01-12-2013, 06:11 PM
brock5ga brock5ga is offline
Registered User
Location: Monroe, GA
 
Join Date: May 2012
Posts: 96
Mein Auto: Z4
I just put the E46 kit in mine. SD Z4MR was kind enough to link the pin out info to me. http://www.bimmerfest.com/forums/sho...d.php?t=667871
Take the gray connector cover off and make sure the pins line up with the correct pins on the back of the radio. I drilled a hole in the cover below the heater controls and mounted the input there as it appears to be installed in the newer models. Works fine. Pins are numbered in the connector on the back of the radio. E46 connector has 10 pins while the Z4 connector has 12. Just ensure the correct pins are aligned.
Reply With Quote