View Single Post
  #2  
Old 01-16-2013, 03:25 PM
boramkiv's Avatar
boramkiv boramkiv is offline
Propellers Up Front
Location: Chesapeake, VA
 
Join Date: Jan 2011
Posts: 1,771
Mein Auto: Some Bavarian car outside
Quote:
Originally Posted by cossie69 View Post
does anyone know the torque settings for the rear subframe mount bolts that go through the bushes, i am goin to replace the 4 bushes as there shot but i cant find any torque settings any where and any tips would be great i have hired the tool and bought bushes but dont want to go ahead till i get the torque settings , hope someone can help me on this as i have no other way of finding out, best reagrds to all
Those are torqued to 143 Nm or 106 ft lbs. if using polyurethane bushings, they can be torqued in the air. If using rubber, you should torque while vehicle is on the ground. Alignment should be done afterwards, if not done recently or if bushing were completely gone.
Reply With Quote