View Single Post
  #4  
Old 01-17-2013, 07:43 AM
supertech777's Avatar
supertech777 supertech777 is offline
Officially Welcomed to the 'Fest
Location: springfield , missouri
 
Join Date: May 2008
Posts: 753
Mein Auto: 1995 525i
Quote:
Originally Posted by Canopy48 View Post
Yes
First do you have the the 3 button fob ? And if u do this is the procedure :
1 remove the cover to the fob .
2 slide the chip socket forward.
3 gently pull the micro chip out of its socket . This chip will be used for coding ur control unit .
4 remove the control unit from the bracket . ( its going to be under the back seat ) remember DO NOT REMOVE THE POWER CONNECTOR )
5 while holding the control unit facing donward , remove the access cover . Insert the micro chip into the units chip socket push the holder socket back to secure the chip .
6 press the reset button . The status led will flash twice to indicate that the code has been accepted .
7 remove chip and replace it back in the fob and your done
Hope this helps and welcome to the fest
Noel


Sent from my Desire HD using Bimmer App
Reply With Quote