View Single Post
  #22  
Old 01-20-2013, 03:11 PM
john kaminski john kaminski is offline
Officially Welcomed to the 'Fest
Location: rochelle il
 
Join Date: Jun 2009
Posts: 297
Mein Auto: 1994 325i
To actually use a torque wrench you would need a 32mm crows foot. However lacking that you could just put a nut & bolt in a vice or what ever and torque it to the specified torque a few times to get the feel for it and then torque the fan nut with a plain wrench to the same pull feeling. Should be pretty close and for sure a heck of a lot closer than a wack with a mallet, especially if no type of holding tool is used.
__________________
Cheap Trick
Reply With Quote