01-23-2013, 11:24 AM
|
 |
* A BLUE PANDIAN SMURF *
Location: New Jersey
|
|
Join Date: Dec 2011
Posts: 338
Mein Auto: BMW F25 X3
|
|
Quote:
Originally Posted by wavewuver
I have used a california water blade to remove most of the rinse water after washing. I also use microfiber towels to final dry.
|
I'm really concerned about your waterblade as you are rubbing those fine dirt that the car wash couldn't take off onto the clear coat, thus creating a lot of swirls.
As you can see that only the clay bay could only take off.
I would suggest, take off the spray adapter on the hose and just put it on a above the fine and let the water slide down.
There would be less water to clean up.
__________________
 
|