View Single Post
  #4  
Old 01-26-2013, 08:32 PM
upallnight upallnight is offline
Officially Welcomed to the 'Fest
Location: Crook County
 
Join Date: Nov 2012
Posts: 498
Mein Auto: BMW, Lotus, Porsche
How did you test the coils? Did you use an ohm meter?

I had a misfire and I finally found the problem being a bad coil. The coil tested good on an ohm meter, but since I was still getting a misfire, I swap the coils to another cylinder. Misfire was still there, but the misfire moved to the other cylinder.

Brought a new coil pack at autozone, clear the trouble code and never had the SES come back on.
Reply With Quote