View Single Post
  #6  
Old 01-28-2013, 07:43 PM
catso's Avatar
catso catso is offline
catso
Location: Chicago
 
Join Date: Dec 2009
Posts: 2,989
Mein Auto: 2000 323i, 1988 528e
Quote:
Originally Posted by stewnmo View Post
first; this is my first post. second; i did try searching first . Here's the rub.....
bought 85 535i for first projet car (am learning as i go). it turns over, but no fire.
i have check all that i am aware of (fuses, relays, distributer, coil, position/speed sensors, etc.. now......
i have found voltage to the coil, but, no pulse from the coil (i would appreciate advice on where to go next). and i checked two pins on the ecu (18 & 35). as i understand, these should have power to them all the time. 18 does, 35 has power when the key is off and on accessory. when key is all the way to on....there is no power on pin 35. is this normal?
if yes, where to now,
if no, do i jumper main relay or trace wire for pin 35.......or something else. i am running out of searchable ideas.
You know, I'm now thinking that it may actually be as simple as a bad coil.
__________________
Don't be gormless; get some gorm!
![/I][/FONT]
Reply With Quote