Thank you for your reply.
Originally Posted by HPIA4v2
You'll need to put the resistor in parallel, across the light bulb terminal. I'll say 1W 240-ohm resistor will do. It really to fool the LCM to think there is incandescent bulb across the terminal.
If this still fail, I'll put the original bulb in place to reset the computer then switch it back to LED. Unless you have a good reset tool like GT or auto-logic to reset lightbulb burn message.
Just curious - how did you come up with 1W 240 Ohms.
The OEM fog lights are 55W. I am just curious if the math makes sense for 1W/240 Ohms in place of 55W bulb.
NOT doubting you - just curious about the formula. I used to be able to calculate this - but this was many, many years ago
2000 DINAN 3