Bimmerfest - BMW Forums - View Single Post - e39 no control from drivers door module
View Single Post
Old 01-30-2013, 01:45 PM
nakoye nakoye is offline
Registered User
Location: Kazanlak, Plovdiv
Join Date: Jan 2013
Posts: 6
Mein Auto: BMW e39
Originally Posted by acoste View Post
o.k. good! No damage then.

Back to the initial issue, I would grab a multimeter and check the P-BUS line from the drivers door module to the general module. If all good, then next step is capturing the signals with oscilloscope.
ok, tomorrow I'll chek again all pins and will write down the results. Thank you again for your time and help.
Reply With Quote