View Single Post
  #2  
Old 02-02-2013, 06:52 AM
mr_bean mr_bean is offline
Officially Welcomed to the 'Fest
Location: NJ
 
Join Date: Mar 2009
Posts: 698
Mein Auto: 2000 328i
To me, it looks like the flange on the drive shaft is too far forward (too close to the flange on the trans). The guibo looks stressed.
If you unbolt the drive shaft from the trans, you should be able to compress the drive shaft so that its flange lines up correctly with the guibo.
Also, make sure centering ring inside the output flange on the trans is in good shape.
Reply With Quote