View Single Post
  #7  
Old 02-02-2013, 08:55 AM
SJBimmer's Avatar
SJBimmer SJBimmer is offline
Living Life At The Beach
Location: In This Place
 
Join Date: Feb 2007
Posts: 3,810
Mein Auto: 2004 325 Convertible
Quote:
Originally Posted by mr_bean View Post
To me, it looks like the flange on the drive shaft is too far forward (too close to the flange on the trans). The guibo looks stressed.
If you unbolt the drive shaft from the trans, you should be able to compress the drive shaft so that its flange lines up correctly with the guibo.
Also, make sure centering ring inside the output flange on the trans is in good shape.
Spot on. That guibo is not going to last long running like that.
Reply With Quote