View Single Post
  #9  
Old 02-02-2013, 11:41 AM
vintage42's Avatar
vintage42 vintage42 is offline
BMW CCA 1405
Location: Louisville, KY
 
Join Date: Jun 2007
Posts: 1,496
Mein Auto: 1997 BMW Z3 1.9 5MT
Quote:
Originally Posted by DreamnZ View Post
... What to you connect? A wire? What's a jumper tool? Is this like my jumper cable?...
A jumper is any conductor used to connect two points. To reset the indicator the two points are terminal 7 in the data port and the grounding nut on the adjacent passenger strut tower about a foot away. The simplest jumper for this is a stiff wire, ideally 2 feet of 12 gauge house wire with the insulation stripped back 1/2 inch on each end.

Or you can buy a "tool":
http://www.ebay.com/itm/120830233463...84.m1497.l2649

The tool means you don't have to use the wire for the right two lengths of time. Like, if you want to rest just the oil, and use the wire too long, you will reset the whole service interval. The tool has a button for each (and evidently a time chip).

See more:
http://www.unofficialbmw.com/e36/ele...ce_lights.html
http://forums.bimmerforums.com/forum....php?t=1933465

Reply With Quote