Thread: Dynamic drive
View Single Post
  #2  
Old 02-09-2013, 06:33 PM
HerbP HerbP is online now
Officially Welcomed to the 'Fest
Location: Georgia
 
Join Date: Jul 2009
Posts: 2,596
Mein Auto: 2005 645Ci & 2007 750Li
I am having the same issue. It most likely a sensor on the Dynamic Drive block, that is causing the problem. The part is around 80.00, & the block is located behind the passenger side wheel well. Once the sensor is replaced, the system should be calibrated using INPA or DIS. I am going to remove my block for inspection, then flush the system. There is a filter located in the system, that I believe should be changed. If the filter is partially plugged, I suspect it could be causing some of the problem. I do not believe there is any in driving the car, while the problem is present. Read the thread below, for more info.

Good Luck!

http://www.bimmerfest.com/forums/sho...d.php?t=450240
Reply With Quote