Bimmerfest - BMW Forums - View Single Post - Audi 22's on a BMW 750i
View Single Post
Old 02-22-2013, 11:43 AM
DriftGirl DriftGirl is offline
SideShow activist
Location: SEATTLE
Join Date: Apr 2012
Posts: 407
Mein Auto: 745Li
Originally Posted by cbell13055 View Post
Is there a set standard for the adapter on siZe????

A wheel guy I'm good friends with took a lot of calculations and said I would need a 28mm in the front and a 41mm in the rear....does this sound about right????
Impossible to calculate without knowing the offset of the wheels you're trying to run...

just remember that 28mm spacer is an inch or so.

****most off the shelf pcd conversion adapters are an inch if you dont get them custom made.

Current Lineup:
BMW E31: Air suspension,19x10 / 19x11 Trafficstar
BMWE38:Air suspension,20x10 / 20x12 Forgiato (SOLD)
BMWE65: 22x10 / 22x11 Asanti ELT (SOLD)
Lexus SC400: Single turbo, 19" SRR wheels
Lexus GS300: VIP , Air Suspension,19" WORK wheels
S13 Silvia: WideBody, JDM conversion,SR20det,15" WORK wheels
Lexus LS430 UL:Air Suspension, 20"MAYA DLS

Last edited by DriftGirl; 02-22-2013 at 11:44 AM.
Reply With Quote