View Single Post
  #3  
Old 04-23-2013, 04:35 PM
Damienreilly Damienreilly is offline
Registered User
Location: newry
 
Join Date: Mar 2013
Posts: 30
Mein Auto: bmw x5 4.6is
if it is anything like the front the bearing is going to have to be pressed in I know the front one has to be
also u have to be carefull not to damage the magntic ring on the bearing which the sensor picks up on for wheel speed
also prob u will have to replace the sensor which picks up on the bearing speed they can be a bitch to remove if in a while so u will prob damage it removing the bearing
I know this is what it is like at the front anyhow , apart from that I would say go for it as long as u can get bearing pressed in
Reply With Quote