Bimmerfest - BMW Forums - View Single Post - Valve stem seals done for $2500!
View Single Post
Old 05-12-2013, 08:52 PM
Rahulk Rahulk is offline
Officially Welcomed to the 'Fest
Location: Orlando ,Fl
Join Date: Jan 2013
Posts: 191
Mein Auto: E53 N62; E90 N52
ever get a P0300 after putting it all back together.... cant figure out where im getting the error from, i checked and double checked all the vacuum hoses, and I even changed out that small tube from the intake elbow..... thru the wire harness case, to the fuel filter pipe... I guess i will need to d oa smoke test, unless you have any other ideas....

blinking red ses light, really rough idle, but if you rev it up, is smoothens out, but you still get the blinking ses light thru out... i wont keep it on for more then a minute, dont want to burn the cat out..... you can smell unburned gasoline thru the exhaust, so its a lean condition....

tried a bottle of Heet, that didnt do anything...