View Single Post
  #35  
Old 09-19-2013, 09:02 AM
John@SAtlBMW John@SAtlBMW is offline
BMW Parts Guy
Location: Atlanta, GA
 
Join Date: Jan 2012
Posts: 177
Mein Auto: e39/e38/austin healey/jag
Quote:
Originally Posted by bluebee View Post
Another dead engine due to overheating reported today ...


EDIT
See also:
- Summary advice to provide users who suspect a major engine repair due to overheating (1) (2) (3) (4) & how to test an engine for a blown head gasket, cracked heads, a warped block, stripped head bolt threads, cam seizures, contaminated bearings, coolant hydrolock, or piston, ring, or valve damage (1) (2) & what are the major factors in deciding whether to rebuild the engine, replace the engine, or sell the car (1) & a DIY for replacing the I6 M54 head gasket (1) (2) & replacing the V8 M62TU head gasket (1) & why these engines are so prone to heat-related damage in the first place (1) & welding the crack between cylinder #3 and the water jacket on the exhaust side (1) & what engine swaps are most recommended (1) (2) (3) & where to obtain a new or rebuilt head (1) replacement short block or long block (1) (2) & how to lift & remove the engine (1) & the most recent real-world results from the last 50 people faced with similar blown engine problems from which this advice came from (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24) (25) (26) (27) (28) (29) (30) (31) (32) (33) (34) (35) (36) (37) (38) (39) (40) (41) (42) (43) (44) (45) (46) (47) (48) (49) (50)

Note: I stopped at 50.
Bluebee. You are a scholar and a gentleman. Thank you for compiling all this research. I've seen this issue pop up quite a bit.
Reply With Quote