View Single Post
  #4  
Old 11-10-2013, 03:11 PM
HPIA4v2 HPIA4v2 is offline
Officially Welcomed to the 'Fest
Location: washington
 
Join Date: Mar 2006
Posts: 2,126
Mein Auto: E60, E71, E92
Quote:
Originally Posted by greymda View Post
thanks for reply!


are you sure it's a Xenon one, because i've ordered a Halogen one (H7/H7, afaik).
after your reply i "re-thinked" and got to the conclusion:

1. it's the low beam H7 connector to the bulb
2. power connector for maybe hi beam
3. it's the power connector for low beam, i.e. #1 in list
4. power connector for maybe angel eyes
5. power connector for side marker/park light
6. self-leveling

two "maybe"s because i must somehow check which is which. can i just power it with 12V or it is no advisable?
The rubber cover is removable, just be careful then you can see on those three wires which one is which.

You can put the H7 onto the socket, but that spades connector suppose to go to Xenon ballast. I don't recall BMW uses spade directly to bulbs.

Yes you can power up using 12-v supply, no harm.
Reply With Quote