I purchased the Bentley manual but found there is very little information on the lower end of the engine.
I looked for a sticky with the specs but couldn't find one.
I need the torque spec on rod bolts for a 2002 M54 3.0L that I am rebuilding... also curious if they recommend disposing of the old bolts and using new ones?
The rods were damaged by a hydrolock and there was no heat damage.
Thanks for your help!
I looked for a sticky with the specs but couldn't find one.
I need the torque spec on rod bolts for a 2002 M54 3.0L that I am rebuilding... also curious if they recommend disposing of the old bolts and using new ones?
The rods were damaged by a hydrolock and there was no heat damage.
Thanks for your help!