Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**

As a new vendor on the forum, I am offering a special promotional deal for the first couple of BMWs who are interested in getting their roof's wrapped with some gloss/matte black or carbon fiber vinyl. (Shoot me a PM for details on pricing, as pricing is different depending on finish, specific car, etc).

I've done hundreds of cars at this point. Here are just one or two quick pictures of cars that I've done recently in each type/finish, just to give you guys an idea of how it looks like and the quality of my work:

Gloss black -





Matte black (looks like the same car, but it's actually a different one) -







3M Di-Noc Carbon Fiber -





For locals, I can supply the materials and do the entire installation at my location, for anything that you need to get done.

However, if you're a non-local (or someone who just wants/needs some material) and would like to give a DIY a shot, I can sell you just the material as well.

- Gloss/matte black roof vinyl (other finishes/colors are available upon request)
- Carbon fiber vinyl
- Black out window trim vinyl
- Interior/exterior trim
- Headlight/Tail light tinting
- Custom cut stickers/graphics
- Full car wraps
- Installations
- And More...

Let me know if you guys have any questions or if you are interested in anything.

thanks.

-Don

donathon@gmail.com

As a new vendor on the forum, I am offering a special promotional deal for the first couple of BMWs who are interested in getting their roof's wrapped with some gloss/matte black or carbon fiber vinyl. (Shoot me a PM for details on pricing, as pricing is different depending on finish, specific car, etc).

I've done hundreds of cars at this point. Here are just one or two quick pictures of cars that I've done recently in each type/finish, just to give you guys an idea of how it looks like and the quality of my work:

Gloss black -





Matte black (looks like the same car, but it's actually a different one) -







3M Di-Noc Carbon Fiber -





For locals, I can supply the materials and do the entire installation at my location, for anything that you need to get done.

However, if you're a non-local (or someone who just wants/needs some material) and would like to give a DIY a shot, I can sell you just the material as well.

- Gloss/matte black roof vinyl (other finishes/colors are available upon request)
- Carbon fiber vinyl
- Black out window trim vinyl
- Interior/exterior trim
- Headlight/Tail light tinting
- Custom cut stickers/graphics
- Full car wraps
- Installations
- And More...

Let me know if you guys have any questions or if you are interested in anything.

thanks.

-Don

donathon@gmail.com

Tinted the tails on this 1 series and wrapped his roof/mirror covers in 3M carbon fiber vinyl.










Blacked out window trim (covered up the chrome)

E63 AMG:











If you guys are looking for any vinyl materials to cover your roof, window trim, etc, shoot me a PM with what you need or post up any questions you might have.

-Don

How difficult is it to install?

I fairly good at window tint if that helps?

Originally Posted by TnT817

How difficult is it to install?

http://bimmerfest.com/forums/showthr...825&highlight=


Maybe you can do better...

Originally Posted by KaptinKP

http://bimmerfest.com/forums/showthr...825&highlight=


Maybe you can do better...

I actually cried a little I was laughing so hard

Do you have 3M di-noc vinyl brushed aluminum? I want to do my interior trim.

Riley time to change mein auto!

Don,

You should post up that GT30 setup.

Looks like quality work Don. Welcome to the Fest.

Originally Posted by TnT817

How difficult is it to install?

I fairly good at window tint if that helps?

It's fairly straight forward I would personally say. As long as you have an attention span that lasts longer than 10 mins, you should be able to do it

Originally Posted by Ryawee

Do you have 3M di-noc vinyl brushed aluminum? I want to do my interior trim.

Yea, I can get that if you want. Let me know if you're needing some.

Originally Posted by FenderBender

Don,

You should post up that GT30 setup.

Would you like to buy it?

Originally Posted by E36 Phantom

Looks like quality work Don. Welcome to the Fest.

Thanks. Always just kinda lurked around here, but now I'll be posting pictures and whatnot more for you guys to see and get ideas/feedback from.

-Don

I'll take the turbo, I don't need the rest though

You basically just want the heart then, haha.

-Don

Correct.

How much for the roof of an e36 in gloss black and the carbon fiber?

this is relevent to my interests

Looks fantastic - shame you are not in Australia!!

yes, where are you located? Im guessing down south due to the palm tree's :/ Let me know when you come to New Hampshire area.

Well it looked like you guys had it on all the way with the exception of the wings. You just use a heat gun and that stuff should go away

That and our attention spans just died...

Vinyl wrapped the rear trunk on this Subaru with the 3M Di-Noc carbon fiber material. Took a before picture of the trunk with the holes and the after once the trunk was wrapped. Note, it may or may not show up in the pictures, but there will still be slight impressions of the holes where the vinyl is covering over.

Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.



















-Don

donathon@gmail.com

As a new vendor on the forum, I am offering a special promotional deal for the first couple of BMWs who are interested in getting their roof's wrapped with some gloss/matte black or carbon fiber vinyl. (Shoot me a PM for details on pricing, as pricing is different depending on finish, specific car, etc).

I've done hundreds of cars at this point. Here are just one or two quick pictures of cars that I've done recently in each type/finish, just to give you guys an idea of how it looks like and the quality of my work:

Gloss black -





Matte black (looks like the same car, but it's actually a different one) -







3M Di-Noc Carbon Fiber -





For locals, I can supply the materials and do the entire installation at my location, for anything that you need to get done.

However, if you're a non-local (or someone who just wants/needs some material) and would like to give a DIY a shot, I can sell you just the material as well.

- Gloss/matte black roof vinyl (other finishes/colors are available upon request)
- Carbon fiber vinyl
- Black out window trim vinyl
- Interior/exterior trim
- Headlight/Tail light tinting
- Custom cut stickers/graphics
- Full car wraps
- Installations
- And More...

Let me know if you guys have any questions or if you are interested in anything.

thanks.

-Don

donathon@gmail.com

I know who you are...

If you know who I am, then what's my name :P