All BMWs BMW ISTA-D 2.30 ENG (UK) + GER (DE) On VMWare

BMW ISTA-D 2.30 ENG (UK) + GER (DE) On VMWare

Courtesy of monekyboy8888 on bmwcoding.com:

RapidShare Links:

https://rapidshare.com/files/1929458..._VM.part01.rar
https://rapidshare.com/files/2564352..._VM.part02.rar
https://rapidshare.com/files/6290184..._VM.part03.rar
https://rapidshare.com/files/9486747..._VM.part04.rar
https://rapidshare.com/files/2050106..._VM.part05.rar
https://rapidshare.com/files/2700713..._VM.part06.rar
https://rapidshare.com/files/3583804..._VM.part07.rar
https://rapidshare.com/files/1421920..._VM.part08.rar
https://rapidshare.com/files/7906549..._VM.part09.rar
https://rapidshare.com/files/3823837..._VM.part10.rar
https://rapidshare.com/files/2935312..._VM.part11.rar
https://rapidshare.com/files/5791451..._VM.part12.rar

Torrent File:

http://fs07n5.sendspace.com/dl/3ccf5...202.30.torrent

1) Needs VMWare or VMWare Player to run VM.

2) Needs Genuine BMW ICOM, or ICOM Clone, or ICOM Emulator.

Pardon my noob ignorance, what's the difference to the E-sys?

Well, never mind, search is your friend :
http://www.obd2be.com/bmw-ista-p-635.html

E-Sys is similar to ISTA/P for Progamming. ISTA/D is for Diagnostics. It has wiring diagrams and diagnosis, but also repair and replace, training, and other documents. essentially DIS, WDS, TIS, etc. all combined.

Originally Posted by shawnsheridan

E-Sys is similar to ISTA/P for Progamming. ISTA/D is for Diagnostics. It has wiring diagrams and diagnosis, but also repair and replace, training, and other documents. essentially DIS, WDS, TIS, etc. all combined.

Thanks, good stuff as usual!

Slightly deviating from subject, try adding 5AS to your FA. Then go to HUD and see the new options, including SLI ON/OFF...

Originally Posted by john mclane

Thanks, good stuff as usual!

Slightly deviating from subject, try adding 5AS to your FA. Then go to HUD and see the new options, including SLI ON/OFF...

Thanks, but I don't have a HUD...that's DreamCar's project.

Originally Posted by shawnsheridan

Thanks, but I don't have a HUD...that's DreamCar's project.

I found that this addition releases the SLI ON/OFF option on coding. That shouldn't matter if you have HUD or not, only the lane departure warning, I believe.
Some of the options are in the KAFAS also...
It also shows a fog detection system with automatic fog lights, particularly useful in soupy days in the Galveston area...

Originally Posted by john mclane

I found that this addition releases the SLI ON/OFF option on coding. That shouldn't matter if you have HUD or not, only the lane departure warning, I believe.
Some of the options are in the KAFAS also...
It also shows a fog detection system with automatic fog lights, particularly useful in soupy days in the Galveston area...

I should have specififed that I don't have LDW either, so I do not have the camera for SLI at all. Automatic Fog Lights are interesting, although I image it's tied to the same camera and SLI weather system.

Originally Posted by shawnsheridan

I should have specififed that I don't have LDW either, so I do not have the camera for SLI at all. Automatic Fog Lights are interesting, although I image it's tied to the same camera and SLI weather system.

Bummer, makes you itch to put a new one on order...I think next time I'll only get (I rarely order) the hardware on board, the software can be dealt later...

Originally Posted by john mclane

I found that this addition releases the SLI ON/OFF option on coding. That shouldn't matter if you have HUD or not, only the lane departure warning, I believe.
Some of the options are in the KAFAS also...
It also shows a fog detection system with automatic fog lights, particularly useful in soupy days in the Galveston area...

John, can you clarify this. Are you saying by adding to the VO and coding a module, the CAFD file has new entries that can be FDL coded that did not exist before, or only that new options appear in iDrive that were not previously present?

Originally Posted by shawnsheridan

John, can you clarify this. Are you saying by adding to the VO and coding a module, the CAFD file has new entries that can be FDL coded that did not exist before, or only that new options appear in iDrive that were not previously present?

The former. The entries were also in English, which I did not see in other files. They did not appear on idrive, but I need to finish changing other options.
I'll take a screen shot next time...

Please take in consideration my newbieness.

Originally Posted by john mclane

The former. The entries were also in English, which I did not see in other files. They did not appear on idrive, but I need to finish changing other options.
I'll take a screen shot next time...

Please take in consideration my newbieness.

Please do confirm this. I have never seen or heard of where coding a VO Change added new CAFD Entries that weren't already there. If true, it could explain why some FDL Codes that one would think should exist haven't been found, as most people bypass the VO change.

Originally Posted by shawnsheridan

Please do confirm this. I have never seen or heard of where coding a VO Change added new CAFD Entries that weren't already there. If true, it could explain why some FDL Codes that one would think should exist haven't been found, as most people bypass the VO change.

Again, accounting that I just started doing this, when I changed the VO with those options, I had CAFD entries that were not there before and the entry description was in English, which I did not see anywhere else.
I can reply later with the FA options I have and you see if it's indeed the way I described or I'm just too new at this...

Wow ! Finally ... Thanks Shawn!... Not sure how many people would really realize the effort in making these things available ....


And we should look in to the idea of gathering funds so that we can get hold off the software which are financially limited... There are hundreds/thousands? of folks who got benefit out of our mission , i hope it shouldnt be a issue.

Originally Posted by dreamcar

wow ! Finally ... Thanks shawn!... Not sure how many people would really realize the effort in making these things available ....


And we should look in to the idea of gathering funds so that we can get hold off the software which are financially limited... There are hundreds/thousands? Of folks who got benefit out of our mission , i hope it shouldnt be a issue.

+1

Icom emulator is no longer for sale At the 150 price, in fact it's now up to 350 for it. I inquired about it a month ago and it was at 15O but now it's jacked up to 350. Sucks. So it's either Chinese Icom for 700+ or Icom emulator for 35O. At those prices clone would be better

Originally Posted by cn555ic

Icom emulator is no longer for sale At the 150 price, in fact it's now up to 350 for it. I inquired about it a month ago and it was at 15O but now it's jacked up to 350. Sucks. So it's either Chinese Icom for 700+ or Icom emulator for 35O. At those prices clone would be better

Supply & demand...but not worth it for that price. The clone I saw close to the ~600 already with shipping. Wait an see the number of offers in alibaba, as they go up, the price goes down.

I manage to get ISTA-D working on Vmware, but I can't get a genuine BMW ICOM to connect.
Is there any settings in vmware network that must configure? like IPs.........
Hope anyone can help me.
Thanks!!

Part11 is offlin, can anyone upload it again please
Thank you

ICOM clone down to $466...

@Shawn, according to this document, wouldn't we only need ICOM A to use ISTA/D in our F10's -> laptop ethernet?

If yes then ICOM A alone is available for $235..rather take that than a vm emu..

Originally Posted by miotoo

@Shawn, according to this document, wouldn't we only need ICOM A to use ISTA/D in our F10's -> laptop ethernet?

If yes then ICOM A alone is available for $225..rather take that than a vm emu..

Agreed, but where can you buy quality Chinese ICOM A Only clone?

Originally Posted by shawnsheridan

Agreed, but where can you buy quality Chinese ICOM A Only clone?

I think it's the same guy you mentioned in your July post above..

http://www.aliexpress.com/item/For-B...668733329.html

Very interesting, the price now is also approachable by a hobbyist like me

Also..according to this document, we might need a specific firmware on the device..'By default supported only chinese clone ICOM with corresponding firmware version'

Originally Posted by miotoo

Also..according to this document, we might need a specific firmware on the device..'By default supported only chinese clone ICOM with corresponding firmware version'

The ICOM firmware version should match the ISPI version of your ISID or ISSS. (i.e. if your ISID/ISSS is version 2.9.x, you should flash the 2.90.x firmware for ICOM). Flashing something like the 3.x ICOM firmware may render the ICOM incompatible with your ISID/ISSS until you either downgrade the ICOM using the restore procedure or upgrade your ISID/ISSS.

ICOM Firmware Restore

ICOM-Firmware-Restore.zip - Contains ICOM_Restore and ICOM A Emergency Software Update
https://www.rapidshare.com/files/258...re-Restore.zip

ICOM Firmware 2.8.x

ICOM-Firmware-2.80.70.zip - Contains ICOM-BootImage-01-09-00 and ICOM-ApplicationImage-01-11-01
https://www.rapidshare.com/files/201...re-2.80.70.zip

ICOM Firmware 2.9.x

ICOM-Firmware-2.90.59.zip - Contains ICOM-BootImage-01-11-01 and ICOM-ApplicationImage-01-15-01
https://www.rapidshare.com/files/212...re-2.90.59.zip

ICOM Firmware 3.0.x

ICOM-Firmware-3.00.43.zip - Contains ICOM-BootImage-01-13-00 and ICOM-ApplicationImage-01-18-00
https://www.rapidshare.com/files/333...re-3.00.43.zip