Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 3 Series / 4 Series > E90/E91/E92/E93 (2006 - 2013)

E90/E91/E92/E93 (2006 - 2013)
The E9X is the 4th evolution of the BMW 3 series including a highly tuned twin turbo 335i variant pushing out 300hp and 300 ft. lbs. of torque. BMW continues to show that it sets the bar for true driving performance! -- View the E9X Wiki

Reply
 
Thread Tools Display Modes
  #1  
Old 10-03-2012, 08:33 PM
szymek szymek is offline
Registered User
Location: Ontario
 
Join Date: Oct 2012
Posts: 3
Mein Auto: 2006 330i
Oil capacity / Sensor issue??

I just did my first own oil change on my 2006 330i. (I always did my own oil changes on previews cars)

I've added 6 L and oil level was showing approximately 1/2. So i kept on adding bit by bit and restarting the car so it recalculates. By the time I realized i've added 8.5L and it's still showing 1 bar less than max? I even took the car around the block and it's still showing 1 bar less than max.

Is it possible that there is something wrong with the sensor?? Did I overfill???

So i started thinking back and calculating how much I've drained. Seems that I've drained approximately 6.5L and before I drained the oil level was showing about 2 bars away from max.

Not sure what to do now? should i drain some of the oil?

(i really miss having a dip stick)
Reply With Quote
Ads by Google
  #2  
Old 10-03-2012, 10:46 PM
szymek szymek is offline
Registered User
Location: Ontario
 
Join Date: Oct 2012
Posts: 3
Mein Auto: 2006 330i
I just double checked in the manual. Engine capacity is 6.5 L. So I have significantly overfilled. I'm glad that I haven't driven to work like that.

So i suppose it must be the sensor - as I can't think of any other explanations.

I've had the car for 3 years and had my local mechanic change the oil and no issues. I finally decided to start doing it on my own (not to save money but for self satisfaction) and something goes off with the sensor.

Unless anyone else thinks of any other culprit..
Reply With Quote
  #3  
Old 10-03-2012, 11:01 PM
Thesourcefed Thesourcefed is offline
Registered User
Location: Oxford
 
Join Date: Oct 2012
Posts: 31
Mein Auto: x5
u should definately have a look again at the senseor
__________________
Reply With Quote
  #4  
Old 10-04-2012, 02:02 PM
tturedraider's Avatar
tturedraider tturedraider is offline
Freedom isn't free!!
Location: Chicago, north shore (via Tennessee & Texas)
 
Join Date: Nov 2005
Posts: 15,011
Mein Auto: '06 Sonora/Beige 330i :-)
The sensor can take as long as 10 minutes to give an accurate oil level reading. The engine needs to be to full operating temperature.
__________________

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." -- Geo. Orwell

2006 330i Sonora w/ ActiveAutoWerke flash tune :-)
2004 330i ZHP Imola/NB - missed
2000 328i TiAg - gone but not forgotten

** Join the BMW CCA www.bmwcca.org
member #388003 - Use me as a referral & you could win a one day ///M Driving School!! **
Reply With Quote
  #5  
Old 10-04-2012, 05:06 PM
szymek szymek is offline
Registered User
Location: Ontario
 
Join Date: Oct 2012
Posts: 3
Mein Auto: 2006 330i
Thanks for the advice!

Well this is first car that I've owned without dip stick.... so I proceeded with oil change like with just any other car. I never realized it will take time for the sensor to adjust. And I suppose i should be paying attention how much oil I'm putting in and what;s car's capacity.

Well bit of an update:
Last night I've decided that I will drain some of the oil as I needed the car to drive to work. Well I've underestimated how hot the oil will be. When i loosened the plug, I over did it and pulled it out, I had a hard time putting it back in and I even dropped it into the pan. Well all of the oil drained out. It was at 1 am... so I guess i'm not going to work.

In the am I bought more oil and put in approx 5.5 L the level was showing 3/4 full. But after driving for couple of km, the level dropped to just above min. I've added another 1L and sensor still showed just above min, but I went for a spin and after few kms, I turned the car off and restarted and when the level recalculated I'm at max! Perfect!

Wow... it was bit expensive oil change, but at least I have self satisfaction! Now I know exactly what the capacity is and I know to let the sensor some time to adjust and recalculate.

On a side note... I'm new to this site... but wow... I'm amazed with the amount of excellent info. I will be regular here now. :-)

Last edited by szymek; 10-04-2012 at 05:08 PM.
Reply With Quote
Reply

Bookmarks


Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 3 Series / 4 Series > E90/E91/E92/E93 (2006 - 2013)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 06:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms