Question about Angel Eyes

So I finally successful in installing the two small angel eyes with Weisslicht angel eye. It turns out, it's only two small angel eyes. I feel so stupid that I always thought install that will change the whole 4 eyes, but only 2 eyes on. The other 2 (the bigger one) is totally faded and off now.

I need professional help on Angel Eyes. So I have to order another pair of White Angel Eyes and remove the bumper to install on the 2 bigger circle angel eyes?

Peace and looking forward to your help. Thank guys.

I don't know if I did wrongly or I have to buy 2 angel eyes. Only the smaller circle is on.

Do I need to open the headlight and paintedit black? I need some helps please.

Sorry I have no clue about these since I've never done them before.

You are probably not getting answers because you posted this in the wrong forum. There is very little traffic down here in the DIY subsection. I would repost the question in the main 6er forum where everyone will see it.

Hi Rey,
There are only 2 lights for the AE's and they light both sets of AE's with a single bulb on either side. Sounds like there is another issue. I'm not that far from you and I'll be back on LA middle of next week. I can take a look if you want. Follow up with a PM if you want.

Originally Posted by reytran

I don't know if I did wrongly or I have to buy 2 angel eyes. Only the smaller circle is on.

Do I need to open the headlight and paintedit black? I need some helps please.

Thanks man !!!

I read the DIY many times, trying to turn it around and around but still same result. I went to a local shop in Santa Monica, the guy tried to bull**** me "You need another pair of angel eyes".

I have never done this before but when I was looking to buy mine at e92-lighting the kit says 1 pair = 4 angle eyes. I don't know where you bought yours from so maybe this will help. Here is a link

http://www.e92-lighting.com/products...0_V3-79-0.html

Sorry I just checked what year your car was. Here is a link for 2008 on up. It still says 4 lights and there is a DIY video and pictures.

http://www.e92-lighting.com/products...2W-1206-0.html

I have an 08 LCI. I used LED lights. There are 2 little holes where the light will shine through on the Inside lights. 1 bulb will light up both sides. It is true that the outer ones are not as bright as the Inner ones. The LED lights I used are a split design and shine directly Into the holes. That's where the issue usually lies, it isn't lines up correctly.