|
|
||||||
|
F10 / F11 (2011 - Current)
The new chapter in the highly successful story of the BMW 5 Series Sedan (F10) and wagon (F11) |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
12-03-2012, 04:42 PM
|
|||
|
|||
|
Coding Error Message
My car just recently had a software update at the dealership for a cold start issue, however it reset all of the coding I'd previously done back to the factory settings. Now when I try making changes in CAFD in the FRM module for example, as well as other modules that I've coded before, I get the following error message when I select "Read coding Data":
Transaktions-Report: Aktion: Codierdaten lesen FRM [72] [C807783] readCPS o.k. cafd_0000012f-012_003_011 Fehler: File for "cafd_0000012f-012_003_011" not found! [C012] I tried making a change to the CAS module, which I've never made any coding changes & did not get an error message. I was able to code in the module. Anyone else encountered this problem? Last edited by VBnNC; 12-03-2012 at 06:18 PM. Reason: moved to another forum 
|
|
#2
12-03-2012, 05:43 PM
|
||||
|
||||
|
I had a problem with coding after the globe update. Go to the coding forum and there is a lot of info there. Good luck.
http://www.bimmerfest.com/forums/forumdisplay.php?f=175
__________________
 2012 BMW 535I 14K Miles ED Pick Up on 12/03/2011; US Pick Up on 01/27/1012 Alpine White, M Sport, Blk Nappa, Cold Weather, Luxury Seating, Premium, Premium Sound, Tech, Sports Trans, Active Cruise, Heads-Up Mods - Quad Exhaust Tips, HID Fog Lights, Clear Front Reflectors, M5 Spoiler, Calipers Painted Black, 12.5 mm Rear Wheel Spacers, 5% Tint Rear - 35% Tint Front - 50% Tint Windshield Coding by itschase (Chase)  Next; ED of 2014 M4
|
|
#3
12-04-2012, 09:52 AM
|
|||
|
|||
|
Get the latest psdzdata files and you should be ok.
|
|
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
