|
|
||||||
|
3 Series / 4 Series
The 3 Series / 4 Series Forum. If you would like to see all new posts in all the forums, click here. |
|
|
Thread Tools | Display Modes |
|
#1
07-21-2002, 06:10 PM
|
|||
|
|||
|
Need help with V1 DIY Install
I have a2002 325xi (built 5/02). I'm doing the V1 install described at:
http://www.bmw330ci.com/DIY_V1.htm When I removed the center panel, I found two wiring harnesses but they do not match up with the instructions: I found a 3-wire harness with a black (not white) connector, and the wire colors are not the same as those in the instructions. I also found a 5-wire harness which has a white (not black) connector; this harness did have a green-with-blue-stripe wire, which I tried, but it did not work. (I've previously wired my V1 into another vehicle, so I know how to use the connector tap.) Is it possible I found the wrong harnesses? (How many unused harnesses can be up there?) The ones I found were easy to find-- I did not have to reach far to the right side of the car. Any suggestions at this point? Btw, what are these two connectors used for? |
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| V1 install | justcor | E36/7 Z3 (1996-2002) and E85 Z4 (2003-2008) | 10 | 04-30-2003 07:46 AM |
| DIY alarm install on wagon | tenorGJ | 3 Series / 4 Series | 4 | 04-15-2003 04:20 PM |
| Xenon and V1 install today | bmargolis | E36/7 Z3 (1996-2002) and E85 Z4 (2003-2008) | 3 | 03-28-2003 08:41 AM |
| where'd you install your v1? (..want pics) | palooka666 | 3 Series / 4 Series | 15 | 12-14-2002 01:25 PM |
| Just ordered my V1, how do I install it? | Cowboy | 3 Series / 4 Series | 3 | 02-04-2002 09:08 AM |
Threaded Mode
